|
|
|
|
| |
The Product
We keep you in suspension longer-
Yes - but how?
Design:
We carefully design each bush to meet your vehicle's specification
and requirements. More about this is to be found in the vehicle
section of the web-site.
Polyurethane:
We manufacture our bushes in house using the best hot cured
T.D.I and M.D.I industrial grade polyurethane elastomers.
Choice
of Grades: We offer four grades of Polybush which
are detailed below. If you have any doubts or concerns which is
right for you, please call on the numbers at the top of the page,
e-mail us or contact one of our ditributors. Please note we do
not do all grades for all vehicle types, see online ordering for
details.
What is The Right Bush For You?
Depending on what you do with your vehicle depends on the type
of Polybush you should have.
 |
Classic |
|  
|
| Whether you do a lot of fast
road work, towing, quarrying or driving along dirt tracks,
this is the bush for you - with the hardness of this bush,
it stiffens up your suspension giving you excellent handling,
durability of polyurethane and ease of fitting. |
 |
Comfort |
| If you are keen
on off roading or going on safari, this bush will suit you
down to the ground, giving more shock absorption when taking
your vehicle to beyond its limits. But also giving that
factory fresh feel for those of you who don't want to change
the way your vehicle rides, along with the benefits of Polybush
Classic. |
|
| If you are still in any doubt,
call us direct or use our on-line help. If you are now ready
to place an order, use our on-line
sales or contact one of our helpful distributors.
On the other hand
For our Land Rover Series Customers |
 |
Dynamic |
| 
|
Leaf sprung suspension is
different to coil sprung suspension - obvious, right? So
we decided to investigate - could we make a better bush
than our existing version?
The answer is yes - compared to the big,
meaty bushes found on coil sprung vehicles, leaf spring
bushes are relatively thin, and small, even though they
have the same heavy axles to hold in place, both front to
rear, and side to side. |
| So, for durability, you need
high tear resistance and the ability to withstand the slicing
action of the spring as it twists together with the usual
polyurethane benefits of long life, resistance to oils and
fluids, and good shock absorbing properties.
Polybush Dynamic gives you all this, and
is proven in similar applications in non stop commercial
fleet operation (where it has demonstrated a 6 fold durability
compared to standard bushes).
The revised tubes supplied with Polybush
Dynamic are carefully tailored to make installation even
easier. |
Call Hayley or Ian on 01978 664316, fax on 01978
661190 or email on sales@polybush.co.uk
|
|
|
|
|
|
