28 September 2026
Speak to one of our experts.
Speak to one of our experts.
15 April 2026
Share:
Advice Blog
If you’re looking up how to fit rear axle bushes on a Ford Fiesta Mk7, the good news is — it’s a lot easier than most people expect.
With the right parts, this isn’t a drawn-out job:
This is usually where people expect trouble — but on these cars, it’s often straightforward.
In many cases:
One solid hit with a hammer and the bush comes free
No complicated tooling, no fighting seized components — just get the beam supported and knock them out cleanly.
This is where the job becomes simple.
You simply:
That’s it. No pressing, no lubrication, no hassle.
If you’re already doing the job, it makes sense to fit something that lasts.
Polybush 40BR has become the mechanics’ go-to choice because:
It’s a simple upgrade that saves you from doing the same job again; That’s what you want. A fit & forget solution.
Fits:
Replacing rear axle bushes on a Fiesta Mk7 doesn’t need to be a long, difficult job.
If you want to see exactly how it’s done, the video above walks through the process step by step.
